SunSet E20 Tester

Now Available - the new SunSet E20c with Color Display !! Optimize your network testing and maintenance with the most comprehensive 2M test set available today ! In today's fast growing telecommunications world, the SunSet E20 offers an unparalleled variety of testing capabilities. The SunSet E20 is designed to test a variety of networks, including Frame Relay Networks, Cellular Networks, Switching Networks, Access Networks, and simple Leased Line Networks. The SunSet E20, in its 1.3 Kg platform, can troubleshoot and locate

• 2M and Datacom
• Frame Relay Networks
• Cellular Networks
• Access Networks
• Switching Networks

Bringing Solutions to your Networks

• 2M Transmission
• Datacom
• Data Multiplex Testing
• GSM
• Frame Relay
• GPRS
• SS7
• ISDN PRI
• V5.1/5.2
• QSIG
• MFC R2
• Signaling System No.5
• X.25
  

1. GSM Field Testing
   Here is a 1.3kg test set that provides 2M transmission testing, traffic analysis (both directions), and TRAU and voice testing. You'll also get in-depth protocol analysis at the A-bis Interface, A interface, and AMP.
   
   
2. Telecom Testing
   Turning up new network locations, troubleshooting service problems, and verifying proper in-service operation are all much easier and faster with the SunSet E20c. This unit travels comfortably to whatever location needs evaluation. It provides a rich set of features for ISDN, QSIG, V5.1/5.2, MFC R2, CAS, and similar applications.
   
   
3. Datacom Testing
   The SunSet E20c provides full transmission testing over 2.048 Mbit/s and V-series datacom interfaces. It verifies datacom circuits by monitoring the received data, control leads, and physical layer results. The SunSet E20c also tests frame relay circuits (over both 2M and datacom) using LMI analysis, PING testing, stress testing, and statistics.

4. ISDN PRA Testing
   The SunSet E20c verifies PRA links using call emulation and troubleshoots signaling problems with detailed protocol analysis. It supports ETSI PRA, Aussi, DASS2/DPNSS, QSIG, and V5.1/5.2.
   
   
5. Exchange Signaling Testing
   Using bi-directional monitoring, call emulation, or full-duplex drop & insert testing, the SunSet E20c verifies operation and troubleshoots line signaling and protocol problems. It provides a flexible and easy solution for MFC R2, DTMF, signaling system No.5, ISDN, and pulse dialing systems.
   
   
6. SS7 Field Testing
   The SunSet E20c delivers economical, first-pass SS7 protocol analysis to the technician. Powerful filters, combined with protocol decodes, help technicians diagnose SS7 network problems.

The SunSet E20 offers exceptional 2M testing capabilities, including full duplex drop and insert testing, international ITU measurements, DTE and DCE datacom emulation, and multiplex testing. With its full transmission and service test features, the flexible SunSet E20 breaks the size/ capability limits previously found in other test gear. Fitting comfortably in the palm of your hand, the SunSet E20 travels effortlessly to remote sites and subscriber locations.

With its high-powered processing architecture and dual receivers and transmitters, the SunSet E20 is incredibly useful for provisioning and troubleshooting a variety of services and technologies. No other equipment of similar size and cost matches its breadth of application or its convenience in today's demanding network environment. The SunSet E20 fully equips you with:

• Frame Relay: LMI analysis, PING testing, CIR verification, statistic analysis
• ISDN PRI: monitoring and emulation for ETSI, DASS2/DPNSS, and QSIG
• V5.1, V5.2 monitoring and emulation
• Full duplex drop and insert testing
• Measurements include: G.821, G.826, M.2100, pulse mask, histograms, level & frequency measurements, and frequency stress testing
• GSM traffic and protocol analysis: A, Abis, MAP
• GSM Voice/TRAU testing: full rate & enhanced full rate, including power measurements and 16K BERT
• Datacom testing at RS232/V.24, RS449/V.36, V.35, X.21/V.11, G.703 co-directional, and RS530 interfaces, including in-service monitoring between DTE and DCE equipment
• VF monitoring: send/measure test tones, noise filters, digit capture & analysis, and CAS analysis
• Call Emulation: DTMF, MFC-R2, pulse, and SS5
• SS7: protocol and traffic analysis for SS7 installation and in-service situations
• 75 ohm unbalanced and 120 ohm balanced connectors
• X.25: Statistic analysis, Fox test
• GPRS Statistics over Abis and GB link
• Remote control software

Spend your time troubleshooting your circuit, not your test set. All this testing power is matched with equally impressive convenience and simplicity: intuitive operations, graphic configuration screens, stored system profiles, stored test results, and remote control. A field-replaceable NiMH battery pack and upgradeable software options ensure that the unit remains in the field and can easily evolve with your testing requirements.

The SunSet E20's high degree of configurability lets you optimize the unit's cost and performance for your particular application.